Until 31st of December 2015 or while stocks last, Fluke (UK) is offering some special process industry tool packages consisting of a range of Calibration Kits or a Troubleshooting Kit at approximately 15% below the cost of the individual items if purchased separately. The Calibration Kit consists of a Fluke 719Pro, which calibrates pressure using a built-in electric pump, and a Fluke 771 milliamp Clamp Meter, which can measure output signals without breaking the loop. The Troubleshooting Kit includes a Fluke 789 ProcessMeter, fitted with a Fluke ir3000 FC connector to link to the Fluke Connect™ wireless network, plus a Fluke a3004 FC 4-20mA DC Current Clamp, also part of the Fluke Connect family. The offers can be accessed from www.fluke.co.uk/promotions
The Fluke 719Pro Electric Pressure Calibrator, included in the Calibration Kit, is ideal for calibrating high accuracy transmitters, pressure switches and pressure gauges with accuracy to ±0.025%. It offers one handed pressure calibration and includes a full functioning loop calibrator that sources, simulates and measures mA signals, and can measure temperature using an optional RTD probe. The Fluke 771 Milliamp Process Clamp Meter delivers 0.2% accuracy with resolution and sensitivity to 0.01mA for testing and troubleshooting PLC and control system analogue I/Os. It is designed for applications where it is impractical to shut down processes, or put systems into “safe” mode, in order to break the loop and place a meter in series with the circuit to take measurements. It features a unique detachable clamp to facilitate measurement in tight spaces, as well as a measurement spotlight that illuminates wires in dark enclosures.
The Fluke 789 ProcessMeter, part of the Troubleshooting Kit, combines a loop calibrator, a true-rms digital multimeter, a 24V loop supply and a selectable 250 Ohm Hart® resistor in a single handheld tool, reducing the need to carry multiple instruments. It can drive up to 20mA into loop instruments with a high input impedance up to 1200O, offers a HART mode setting with a built-in 250O resistor, and 0% and 100% buttons to toggle between 4mA and 20mA sourcing for quick span checks. The Fluke ir3000 FC enables the ProcessMeter to wirelessly transmit measurement data to a smart phone for secure storage on the cloud, thus enabling access by any team member in the field. The Fluke a3004 FC Current Clamp is a fully functional current clamp meter which measures 4mA to 20mA signals without “breaking the loop”. It features a detachable clamp with extension cable for measurements in tight locations and can be used as a standalone meter or as part of a system. A logging function enables the recording and saving of up to 65,000 measurements. As part of the Connect family of test tools, it too will wirelessly transmit data to a smart phone.
Information about all Fluke products can be obtained via the Fluke web site at www.fluke.co.uk.
