Digital Rate & Totalising Flow Indicator

The Pulsite Solo from Titan Enterprises is an affordable battery powered rate and total flow indicator.

Offering the flexibility of panel, wall or surface mounting this new digital display instrument has been designed for use with switch, coil and magnetic sensor inputs.  With housing constructed from durable polymer, and sealed to IP65 specifications, the Pulsite Solo can be used in a wide range of operating environments.

Programming is simple using two push buttons and logical prompts in English on the LCD display.  The replaceable battery life is estimated to be well in excess of 5 years when the Pulsite Solo is used as a totaliser.  With rate readings the life of the Pulsite Solo will depend on the duty cycle but is still several years.  The Pulsite Solo can also be externally dc powered if required.  The meter will take frequencies from dc through to 2 KHz and scale them to display rate or total.  The scaling factors are adjustable from 0.01 to 9999 and the time base is selectable as seconds, minutes or hours.

For further information on the Pulsite Solo please visit https://flowmeters.co.uk/pulsite-solo-rate-totalising-flow-meter-battery-powered-digital-rate-and-total-indicator/ or contact Titan Enterprises on +44-1935-812790 or sales@flowmeters.co.uk

 

 

Ultrasonic Flowmeter for Process & Control

The Process Atrato from Titan Enterprises is a low volume, high performance ultrasonic flow meter packaged to address the challenges of the process and control environment.

The compact Process Atrato flow meter combines all the technological advantages of market-leading Atrato ultrasonic technology (high linearity, high sensitivity, wide flow range linearity, no moving parts, fast response time, can be installed anywhere) with a new durable construction. Built from 316 stainless steel and PEEK – the Process Atrato is supplied sealed to the IP65 standard.  The combination of durable housing and top performance, in a very reliable flow meter, delivers a new tool for engineers at a reduced cost of ownership compared to existing flow measurement technologies serving the process and control market.

Rated for use up to 65°C and 20 Bar the Process Atrato is available in 4 models operating over flow ranges from 2 ml/min to 15 litres per minute, accuracy is ±1% over the whole flow range. Each Process Atrato is calibrated with a pre-set ‘K’ factor so all meters of the same flow range are fully interchangeable simplifying assembly and set-up procedures for OEM manufacturers looking to integrate the flow meter into their process and control set-up.

As standard the Process Atrato comes with two frequency outputs (PNP and NPN).  Two multicolour LEDs indicate signal strength, power malfunctions and pulse outputs.   Electrical connections are through a standard M12 four pin, sensor connector.

Using patented technology that enables it to operate with excellent accuracy over very wide flow ranges, the Atrato range of inline flow meters is a genuine breakthrough in flow meter technology.  The advanced Atrato signal processing system permits flow measurement across the whole Reynolds number range allowing both viscous and non-viscous products to be metered anywhere.

For further information on the Process Atrato ultrasonic flow meter visit www.atratoflowmeters.com/atrato-process-ultrasonic-flowmeter-stainless-steel or contact Titan Enterprises on +44-1935-812790 / sales@flowmeters.co.uk

 

Flowmeters for Critical Applications

For critical flow measurements – Titan Enterprises Ltd. has established a itself as a leading manufacturer of off-the-shelf meters or fully bespoke OEM flow systems for challenging applications.

Drawing upon over 40-years experience of flowmeter innovation, Titan Enterprises is able to today supply innovative flow measurement solutions into a broad range of sectors, including automotive, food and drink, industrial, laboratory, medical, petrochemical and pharmaceuticals. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.  The company produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.

The portfolio of flowmeters offered by Titan Enterprises includes high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flowmeters, Turbine flowmeters and an extensive instrument range.

For further information please visit www.flowmeters.co.uk or contact Titan Enterprises on +44-1935-812790 / sales@flowmeters.co.uk