REGULATORS, RELIEF, BACK PRESSURE IN LINE DESIGNS 400 BARS
Pressure reducing and regulator valves are designed to meet the requirements of many industry sectors. Products include high flow, pressures and temperatures. With the many available options can meet most any requirement for pressure control or relief.
Full range of valves designed for use on oils, chemicals, water, sanitary and high purity fluids as well as gas, both air and corrosive properties.
Inline design means low pressure drop thru, the system diaphragms are available in many materials to meet requirements for chemical corrosion as well as temperature. Pressures are available to 400 bars flow rates to 300 l/min. Threaded or flanged connections. All major metal groups as well as engineered plastics.
Flow section includes sensors from a few cc to 18 l/min on liquids and gases.fully adjustable set points.
Flow controllers and excess flow valves offer self-contained units to replace the need for a sensor and then controllers. Metal or plastics to 200 bars with response times to one second.
Excess flow valves offers automatic shut down on flow upsets.
With pressures to 400 bars. Either automatic or manual reset functions.
The range offers a solution for most all requirements for pressure l and flow control/measurement in liquid or gas to maximize system performance as well as provide total safety.
ESE bv
Oegstgeest
Netherlands
Tele 31 71 5173947
valves@ese.tc
www.ese.tc
